Professor Lynkhart's Cabinet of Curiosities - Final Part!

Well, the time has come, you've seen all the work that went into it, so I'm now proud to reveal the final model in all its glory!

Professor Lynkhart's Cabinet of Curiosities! (part 1)

Months and months and months ago I posted about an exciting new project I was starting at college in my final block...and then promptly never mentioned it again. This was due to many reasons, mostly me stressing over getting the damn thing finished, and my apparent inability to post things as and when they occur and not half a year down the line! I also hadn't taken any photos of the finished piece and as the model was still at college over the summer, I couldn't get at it until the next term. It's been yet more months since term restarted but I finally have it in my house after getting my dad's assistance to help me get it into the car so I was able to get photos of it at last.

So, just what is this thing, I hear you ask?

Well...

The end (of the course) is nigh!

Apologies once again for being so incredibly lax in posting recently, college has been manic!

As it happens, I can't use that as an excuse any more as I am now officially finished my course! It has been an incredible three years and I honestly don't want to leave, I'm going to miss it so much. :(


 A couple of months ago, some students from the filmmaking department of our college asked I and some of my friends if we'd be up for taking part in a short film about the modelmaking course and what we do on it. There were only a few of us that were 'brave' enough to take part so I managed a little section halfway through with Ferdinand the Unicorn! XD I got super nervous (which is why I'm blethering on so much) as although I can happily talk to people about whatever, as soon as there's a camera in my face I just go all over the place.

It's my end of year show next week, and immediately after that, myself and a handful of my classmates will be travelling down to London for the 'New Blades' modelmaking recruitment fair on Wednesday. I wasn't expecting to be picked at all (only about six of us are going) so I'm really looking forward to it. After that (or perhaps a week later as we're still not finished the Corris model, lol) I'll have completely finished with it all which really makes me sad as I love it so much and I really don't want to leave. :(

https://www.youtube.com/watch?v=bJqVHCbT2-U

I'll post about my final project properly next week with a run-down on how I made everything and how our end of year show/Blades went once everything's over and done with and I'll also have some rather exciting news about my modelmaking in general so watch this space!

Proto-mouse!

As the Christmas holidays come to an end today and I'm back at college tomorrow, I think I really ought to show you all what I got up to last term.

------

Our main project required us to make an upscaled prototype model of a manufactured object with a couple of constraints - it had to be a manufactured object (so no pieces of fruit or natural items etc) and had to involve vacformed, turned and lasercut parts as well as showing a sectional view where part of the model was sliced open so you could see it's interior parts.

I chose a computer mouse because I thought it would be relatively straightforward (hahahahaha, no) and well, this is what happened. :P

End of Year Show!

It was my end of year show last night and the turnout was incredible. The room was absolutely roasting as there were so many people there but it was really good. (I took the first before the room was open  :P)

 

 




There isn't much to say really other than to point out just how talented the people on this course are. :D

 I didn't take many photos (shocking, I know!) so I can't show you all of the second year's incredible models, all of which were incredibly professional looking, but here, have some from my year. :P


My Unicorn, (now officially named Ferdinand for no obvious reason that I can tell. XD) tree, door from last year and graded unit model hidden at the back because it's terrible.




Jack's graded unit model, prop and doorway...



Liam's graded unit model, door and prop...



Stuart's graded unit, prop, door etc.







Jonathan and John's work.



Robbie and David's work.




David's absolutely FANTASTIC 'Grotesque' carved entirely out of blue foam!



Julia, Paula and Robbie's work.





I only managed to photograph two of the second year's work and I can't remember who they were by but still, here they are!



Davy Jones from Pirates of the Caribbean (known jokingly as 'Farmer Jones' when his hat was still an uncustomised straw hat from the charity shop XD)



The ship from District 9.

Let the summer begin!

Today was my last day of college for this year (I still have one year to go) but it didn't really feel like it at all. The time has just flown by and I can scarcely believe that I've been doing this modelmaking course for two years now! O_O

I finished my door (complete with severed heads!)

 

(with Ferdinand the Unicorn. :P)

...and finally got the hellish thing that was the graded unit over and done with. I somehow managed to get 87 ½% for it which works out as a high A - something I was NOT expecting as I couldn't get enthused with the subject at all. I didn't mention it on here as I was stressing over it too much but basically we had to design a piece of sculpture to go outside the Glasgow Riverside Museum with the theme of 'man's love affair with transport'.

I ended up designing a zoetrope which would show the evolution of a particular mode of transportation in the form of a wheel which would spin either by the wind or by visitors pushing it. My final model was awful but the photoshop job I did of inserting it outside the museum in clusters wasn't too bad. :P



 I made a gif of what you'd see if the zoetrope part actually worked too. I drew all the frames from photos of old and new bicycles and motorbikes.



Anyway, it's our end of year show on Tuesday where we can showcase everything we've made this year then I have a couple of months of holiday before I go back in August. :D

I want to do a lot of model horse stuff in the summer while I can as I feel I've been neglecting it recently and I think I've probably lost everyone's interest in this blog as a result. :(

I've been making a few props and things in any spare time I could muster recently though so I might have something to post in the next week. I have a new Julip to introduce but I can't until she tells me her name which might be a while as she's being less than forthcoming!

The Tree of the Dead - nearly finished!

I appear to have disappeared off the face of the earth recently and have been severely neglecting this blog, much to my despair so sorry about that. If it's any consolation it's because I've been working on a lot of collegey stuff; half of which I've been really enjoying while the rest...well, put it this way, I'm glad it's over. XD

The last time you saw the Tree of the Dead sculpture it looked like this:

As I type, it's very nearly finished, all I need to do is paint it which I will most likely do on Monday when I get back. Until then however, here's a walkthrough of it's journey to (almost) completion.

--------------------------

I find sculpting to be a highly relaxing pastime and it certainly eased the stress levels associated with the graded unit I was doing at college on the days I wasn't doing this!

After blocking in the basic shape and form of the tree using multiple reference images from the film, I began to add in all the details and textures - in other words, the fun bit. :P I also added a base to it, transferred the whole thing onto a sheet of black styrene and marked in some rough texturing to emulate groundcover. It would be covered over at a later date but I wanted to make sure there was something there in case any of the scatter came off in the future. I used a stiff brush to describe the bark texture - something which turned out really nicely in the final casting.

As this was the master and sculpted out of plasticine, I needed to make a mould of it so I could cast the final piece in resin. I had the choice of either silicone (expensive but very durable) or latex (cheap, wears out eventually but durable enough for several castings) and ended up going for the latex as I didn't fancy forking out £50+ for a new barrel of the stuff.

Mouldmaking with latex is a bit of a time consuming process as where with silicone you can just mix it up, pour over your master and wait for it to set, latex must be built up in layers. If I had been short on time to finish the project I would have bitten the bullet and gone for the silicone instead but I was ahead of most people in the class as I got the master sculpted in super-quick time so I could afford to spend a little longer working on the mould.

Liquid latex is a very runny material in it's raw state and dries quickly so it's ideal for preserving details. I did several thin layers, making sure to avoid any air bubbles as they'd spell disaster at this stage in the process.

Below: First image shows the first layer of latex after application - you can see the edges drying already - and the second shows it the following day, ready for another coat.




Many layers later, it was time to bulk the mould up. I added a thickening agent to the latex mix which, after some vigorous mixing, changed to the viscosity and general appearance of mayonnaise. (though I'd avoid it with salads. :P) This took longer to cure than the previous coats as it was so thick but it was important to give it as much time as was required so that the final mould would be durable enough in the long run. On larger moulds, it is common to add sheets of fabric or hessian between latex layers as it strengthens it and helps it to hold its shape but I didn't need to on this occasion.



Now looking very much like the filling of an orange flavoured Revel, the time had come to make the plaster 'coat' for the latex mould. This was necessary to keep the mould from warping out of shape once the resin was poured in. To make sure none of the plaster escaped, I constructed a simple box out of scrap styrene and dichlo'd it together. In hindsight I should have hotglued the edges to be sure there'd be no leaks but at the time everyone thought it was watertight so...yeah. XD
You can probably see what's coming now...



Simon and I mixed up some plaster and poured it in...



...only to discover that two of the sides were leaking! I asked Si the best way to patch it up but he insisted it was easier if he just plugged the gaps with his fingers until it set, something I think he lived to regret when it took longer than he expected and had to stand there for twenty minutes unable to move his hands. XD

The other snag was that we'd accidentally made waaaaay too much plaster so I had to race around the department to see if anyone had any moulds they wanted filled before it went off and became unusable. Luckily we found an old vacform of a Darth Vader mask so we managed to use up most of it in that after spending several hilarious minutes trying to prop it up with paper cups as the vacform was wonky and threatened to fall over and spill all the plaster!


 


Some time later, we removed the styrene box and tipped it over to reveal...

 

 

The never-before-seen underside of the tree! The mould had turned out really well, capturing loads of detailing, so all that remained was to remove all the plasticine, clean out the mould and pour some resin!

Getting rid of the plasticine proved to be a lot trickier than you'd have thought however and it took nearly an entire day just to get the bulk of it away.



I always ended up with little streaky bits and while they came off easily with a bit of work, it was incredibly time consuming.

In the end however, I was left with a really rather nice mould. Some of the deeper undercuts were a bit of a worry as they may not survive the first casting but it was nothing I couldn't fix afterwards if need be.

Now, after weeks of work, the moment of truth had come.

Would it work?



Answer...

Yes!

...and no.

On the whole, it turned out incredibly well; the latex had captured every detail and transferred it to the resin but some of the branches didn't survive. In all honesty I'd expected that so it wasn't too much of a big deal. The undercuts did well but some of the mould in those areas was damaged when we took out the resin so it'll have to undergo a bit of restoration work for future castings.

You can see some of the latex caught inside the undercut in the picture below.

There ended up being a LOT of unwanted flashing around the cast as I, under the well-meaning but otherwise flawed advise from a fellow classmate, placed a sheet of styrene over the mould shortly after pouring to even out the back...only we usually use waxed acrylic for that purpose as it doesn't stick to the resin and can be removed afterwards. So yeah, you've guessed it, it stuck to the styrene and made things ten times more difficult for myself. XD
Most of it came off easily enough but I lost a few sections of branch in the process. I reattached them but I could have done without the hassle.

Another day or so later and it was done! I was amazed that it could support itself and remain freestanding, although it did lean backwards a little bit.





Unfortunately, when I saw it standing there for the first time, only one thing came to mind and now that I've seen it, it cannot be unseen!



Apologies. XD


Although it could stand up by itself ok, it needed a wider base so I could do some groundwork and make it more of a feature in its own right so I cut out some MDF on the bandsaw and hotglued it on. I then broke out the milliput (eurgh) and used that to smooth the transition between the two finishes.



Faffing around with part of classmate Jack's graded unit model. :P (bonus points if you get the Harry Potter reference :P)

 

 I spent yesterday afternoon adding scenic scatter to the base which, while fun, was bittersweet as the final finish for all the models is GREY so it'll all have to be painted over next week. :(

So yeah, pretty much finished now, save for the painting!

For a first foray into sculpting and mouldmaking I really couldn't be happier and now that I know what I'm doing I'd really like to do some more stuff at home over the summer. 

I still have a fortnight left before the end of the year (where did the time go?! :o) so I'm going to spend most of that time recasting the tree as I have a few people interested in getting a copy and if I can get the castings done before the end of term I can work on them over the summer and finish them up properly.

So yeah, lots of fun has been had on this project; it's exactly the kind of thing I want to do in the future career-wise so here's hoping it'll be the start of something big!

I shall leave you with a photo of the next cast immediately after pouring - I didn't add any pigments to the mix so it'll come out transparent and blue!

EG out! :D