Thursday 4 April 2013

1:6 Scale Posable Horse Project!

'Inky' WIP

Long time, no blog!

I wish I could say I've been overwhelmed with work and things but alas, not exactly. Our work at college is still at the 'research' stage so I have yet to make anything modelly and with regards to my home life, I'm afraid to say that Skyrim has taken over. ;D
(with music like this are you surprised?)

For those not familiar with it, The Elder Scrolls V: Skyrim is one of the best games I've ever had the pleasure of playing and I would highly recommend it to anyone. It is set in a vast open world and you have more or less complete freedom to play as you like, from the look of your character to the weapons you wield and who you side with. Plus, there are dragons and hairy cobs, what more do you want? ;)

Here's the trailer if you need further convincing...




Anyway, because of its awesomeness, I have logged over 300 hours playtime (yes, I AM that sad) and have built up quite a backstory and personality for my main character, Skara the Breton thief/archer.




I wanted to immortalise her in 1/6th scale with the intention of doing some photostories and snazzy photoshoots out in the countryside so I bought a suitable figure on ebay and started making her clothes and things. (but that's for another post I think)

ANYWAY, the crux of this post is that in addition to her armour and weapons and whatnot, there is one very crucial element that was missing.

Her horse. (awful screenshots are awful, sorry!)



Say hello Inky!



You can't actually give them names in-game unfortunately but to me, this lovely big fat cob will forever be a mare called Inky and I wanted Skara's 1/6th equivalent to have her too.

Regular readers will know that I sometimes make poseable fantasy creatures from wire, sculpey and fur fabric but as I'd never before attempted to make a real animal, I thought it was about time I gave it a try so here's how I did it!

To start with, I drew out the basic outline of what I wanted to make. Using images from the internet, I was able to scale her to roughly the right size. Normally I'd have printed out things but as our printer died a death a few months back, I have no access to one at home so I just had to improvise.



'Inky' WIP

Once I'd got the basic proportions right (ignore the awfulness that is that drawing - it was just to give the idea!) I started sculpting the head. I used scrunched up tinfoil to create the core, then wrapped it in florist's tape and sewed the eyes on.

'Inky' WIP

The sculpey was layered on afterwards and built up until it started looking horselike. I wanted it to look realistic and yet stylised as Skyrim's horses have a really homely look to them that I like.

'Inky' WIP'Inky' WIP

I made a hole through the corners of the mouth before baking which enables me to give her an actual mouthpiece. This will be very useful when it comes to making tack for her as I won't have to worry about using sticky wax or the like. I'm particularly pleased with the nose as well.

'Inky' WIP

The lack of ears was intentional as I really wanted to try something I'd been pondering over for a while - ball jointed ears!
Once baked, I hollowed out two small earholes just small enough that the bottom of a plastic drink stirrer (the ones with the ball at the ends) could pop into.

'Inky' WIP

To my delight, they not only fitted perfectly but had a good degree of movement to them as well.

'Inky' WIP'Inky' WIP

The plastic rods were cut down and sanded til nearly flat, then glued to leather ears which would then be glued to shape once the rest of the horse was assembled. These were later covered with black felt to hide the posts.

'Inky' WIP

'Inky' WIP

^ Grumpy Inky is grumpy. :P

Now that the head was completed, the feet were next. I needed to make these quite big and flat to support the weight of the doll as well as to balance out the head visually. Luckily for me, most big fat cobs have enormous feet anyway so it wasn't too hard to get away with. In hindsight I should really have weighed them down a bit more but hey-ho.

I started out by drawing the footprint, copying it and, using the superglue/bicarb method, attached my wire to them before building up the hooves in Sculpey.

'Inky' WIP'Inky' WIP

'Inky' WIP

I didn't give her shoes because they don't appear to have them in the game and besides, they don't really have many paved roads in Skyrim and any fast work is done by riverbanks or on dirt tracks so I think she'll be fine without them. :P

'Inky' WIP

So far, so good!

A quick coat of paint and some temporary hair made me so happy - she looked much better than I'd ever imagined she would!

'Inky' WIP

Next, I painted her feet (which turned out a little too dark so I may revisit them at a later stage) and hot-glued them to the twisted wire legs I constructed in accordance with the paper template. I always attach heads and feet in this way, wire to wire as I feel it is a stronger way to attach them than having the clay parts sculpted directly onto the wire. It also means that if something were to go horribly wrong, I could remove them without destroying the entire piece.

'Inky' WIP

The armature was made up of multiple strands of wire (liberated from my grandpa's garage so no, I don't know the gauge or type) twisted together.

'Inky' WIP

'Inky' WIP

I went through rather a lot of glue sticks in my glue-gun for the parts I wanted to stay rigid but I think it paid off.

Next to go on was the wadding. I layered it and then wound thread around it to keep everything together and to build up muscle mass. This next picture does make her look like a mule but I assure you, it's just dodgy perspective! XD

'Inky' WIP

I sewed some wooden craft sticks to her back as I wanted to strengthen it, given that she'd be expected to carry a rider, tack and an assortment of kit in the future. I'm not sure if it made much of a difference but it certainly feels more substantial than it would have been if I hadn't done it. I also hot-glued in a weight inside the hindquarters to counteract the weight of the head so that she wouldn't fall flat on her face. XD

'Inky' WIP

With each layer of wadding, she began to look more like a horse...

'Inky' WIP

...until finally it was time to add the furrrrrrrr!
Now I don't claim to be an expert in pattern-making because I most certainly am not and Inky ended up with plenty of patches where I had to add extra bits in but hopefully it's not too noticeable.

Anyway, I made up some basic patterns using some old felt I had knocking about (I think my mum used it to make me a Robin Hood costume when I was about five so it's been here for donkey's years) and gave it a go.

'Inky' WIP

Unlike my other dolls, I went for el cheapo fur fabric instead of the more expensive and higher quality stuff. This was partly because I was skint and would rather pay the £6 a metre for this rather than the £25 a metre I'd need for something else...and also the fact that it was the only long pile fur fabric the right colour in the shop. XD I know I could have ordered some online but I'm lazy that way and besides, I was going to trim half of it off anyway so it didn't really matter.

With the first layer on, Inky closely resembled a Musk Oxen rather than a cob...

'Inky' WIP

...but with some trimming...

'Inky' WIP

'Inky' WIP

...she turned back into a horse!


'Inky' WIP

Her mane and tail are mohair - the mane was sewn to the neck after one side of fabric was on and the other half hid the seams nicely. The tail on the other hand....god, what a nightmare!
I'm used to hairing Julips which are 1/12th scale and more often than not, have to trim the shanks down to scale - with this however, I needed as much length on the hair as possible! Unfortunately for me, the hair just wasn't co-operating and after faffing about with glue for days I ended up resorting to the glue-gun again. As a result the tail isn't nearly as full or long as I would have liked but at least it's not all falling apart again. It is based on a dock (which I unfortunately made too low, argh!) so I can adjust it if needed. It was at this stage that I realised how massive a neck I'd given her but by then it was too late to change so I'm afraid she's just stuck with a super cresty neck now...

I painted her eyes and gave her a beard - a strip of the fur fabric glued to the underside of her head.

'Inky' WIP

I then coated her head in PVA glue (being careful to cover up the eyes, fur and mohair) and doused her in black flock so that the head wouldn't look out of place with the fur. It's a little lumpy in places but as it's just held on with PVA I can easily take it off and redo if it starts to annoy me. I flocked the outside of her ears too but because the insides were felt glued to the leather they didn't need doing.
I also gave her a little star because although they don't appear to have them in the game, the forelock obscures that part of her head so to my mind, she may well have one, we just can't see it. :P

'Inky' WIP

With a really basic halter made from shoelaces, Skara (with temporary Barbie head) has a sit...

'Inky' WIP

...then it was outside for some shinier photos.

'Inky' WIP

'Inky' WIP

'Inky' WIP

Her balance still isn't perfect - she's definitely more stable on unstable ground for some reason - but she can do a fairly decent trot...

'Inky' WIP

...and a rear, with a little help from some shrubbery. XD

'Inky' WIP

She may not be a flashy warmblood type but her jumping's not half bad either...

'Inky' WIP

'Inky' WIP

'Inky' WIP


Here's a photo to show scale with a 1:9 Breyer Traditional and a 1:12 Julip Cob Stallion just in case you were wondering just how big she actually is.

'Inky' WIP

So yeeeeah, I'm pretty pleased with her all things considered and although there are a number of things I wish I'd done differently, I think I'll leave them til my next attempt...whenever that may be. :P
My next task will be to make her some tack and get Skara sorted out so watch this space! ;)

'Inky' WIP




26 comments:

  1. Absolutly Brilliant! From the Idea to the complete Horse Figure.With real Furr and a Talent by Sculpting, Great.
    Greetings Ephiane.

    ReplyDelete
  2. Whenever you post something you are up to awesomeness! *bows to wonderful creativity* And I think I am a bit in love. This surely is the cutest fullbody-haired horse that I have seen in a while. <3

    ReplyDelete
    Replies
    1. :D I do my best not to disappoint! XD

      Delete
    2. So far, you are doing a great job. *g*

      Your fuzzy horse inspired me to work on my own fuzzy rehab-case, as well, (non-poseable and more a repairjob than anything else) He will soon make a first appearance in my blog if everything goes well. He's a already hairing like a pro- I did not know that model horses have shedding season, too, LOL!! I hope your's doesn't...

      Delete
  3. Wow! Stunning work. You did a great job on the muzzle sculpting and those posable ears are nothing short of brilliant.

    ReplyDelete
    Replies
    1. Thank you! I kept forgetting to reposition them for photos though! XD

      Delete
  4. That is AWESOME! Great job!
    Wish I could make stuff like that!

    Rosie

    ReplyDelete
    Replies
    1. Well why not give it a go? I never thought I could make this either but I gave it a bash and it turned out ok! lol

      Delete
  5. Wow! A really interesting inspiring post :) I started to sculpt a couple of horses once but in trying to find a way to finish them I managed to spoil them and had to get rid of them, but I'm all inspired to start again now :)

    ReplyDelete
    Replies
    1. Awwww, you should definitely try again! I like your work!

      Delete
  6. Awesome! What a fun idea!

    ReplyDelete
  7. Whoa, that's wild! You're far braver than I. Great job!

    ReplyDelete
    Replies
    1. Heh, I think I'd beg to differ - I couldn't make things that tiny on such a regular basis like you!

      Delete
  8. It's always fun to see what sorts of things you've been up to. :) This is brilliant! She turned out so nice. (and I love the ears!)

    ReplyDelete
    Replies
    1. :D
      I still need to get my arse in gear and start on the tack...

      Delete
  9. wow your really good, if you don't mind me asking what brand are your model people i've been looking everywhere to find a good replacement for my julip people who i find lose the ability to keep their arms and legs in a fixed shape after a while which renders then useless for horse riding purposes!! thanks

    ReplyDelete
    Replies
    1. Thank you! :D
      The majority of them are Doctor Who or Primeval figures, though I'm starting to introduce more handmade ones as my sculpting improves. :)
      You can customise Julip riders so they'll ride properly if you take a scalpel to them! If you cut away the plastic at their knees, elbows and the top of their legs, they'll sit in much better positions as the wire is free to bend without loads of excess plastic in the way. Often I take the wires out of the newer ones and replace them as it's so stiff it's nigh impossible to position anyway!

      Delete
  10. That is freaking AMAZING! I'm just absolutely awed, from start to finish this project just blows my mind. Just gonna sit here and stare a while longer...:D

    ReplyDelete
    Replies
    1. Haha, thank you so much! :D I'd really like to make another one at some point as poor Inky's legs have started to bow a little. XD

      Delete
  11. I love this little horse. I never get tired of looking at the process. It's so good to let something build in your mind then make it happen. Fantastic.

    ReplyDelete
  12. This is awesome! Can you make me a fat palomino halflinger ? Jk unless you want too. ;D

    ReplyDelete
  13. I am speechless!!! This horse is incredibly beautiful. True masterpiece. My dolls would love to have. I love her poseability and her looks is stunning. She seems so strong impressive and magical.

    ReplyDelete
  14. This is amazing! I totally want to make my own poseable 1/6th horse now. Thanks for the inspiration!

    ReplyDelete
  15. For many horse owners, the cost of keeping their horse transportation on the road can appear an overwhelming and impossible challenge, especially at a time when everyone is still recovering from a global dip in the economy, and there is a never-ending increase in the cost of living. Horse Transportation

    ReplyDelete